English
Français
Deutsch
Español
Italiano
Português
日本語
한국어
Русский
M12 M16 M19 M25 Waterproof IP67 IP68 Plug Outdoor Cable Connector
Description
Basic Info
| Trademark | Maxtree |
| Origin | Jiangsu |
Product Description
1. Operating Environmental Conditions
Working temperature: -25ºC~105ºC
Storage temperature: -25ºC~85ºC
Large pneumatic pressure: (86-106)Kpa
Relative humidity: ≤90%
Waterproof level: IP68
Connector Type: Soldering connector
2. Product Structure Description
Connection mode: Line with injection molding
Rated Current: 20A
Maximum cable diameter: Φ10.5mm
Connector contacts and coatings: Φ1.5.
260ºC temperature resistance
V-0 Fire retardant
Contact plastic: nylon
waterproof apron: Silicone
Connector contacts and plating: copper, copper plated nickel plated zinc.
1: Appearance, environment description
1.1 Outline reference dimensions (length × width × height) (mm): subject to the actual object (drawings are for reference only).
1.2 Environmental conditions for use
Working temperature: -40ºC~105ºC
Storage temperature: -25ºC~85ºC
Insulation material: Nylon Atmospheric pressure: (86~106) KPa
Relative humidity: ≤90%
Waterproof level: IP68Key Features
3.1 Dielectric strength: According to the 1005 method in GJB1217-1991, under normal temperature and pressure, between the conductor and the insulator, the test voltage (effective value) AC 1500V/50Hz, no breakdown or arcing phenomenon after 1min, super leakage current is less than 2mA. 3.2 Insulation resistance: According to the 1005 method in GJB1217-1991, under normal temperature and pressure, between the conductor and the insulator, the test voltage (effective value) DC 500V, Insulation resistance greater than 1000MΩ.
3.3 Contact resistance: Under normal temperature and pressure, when the male and female waterproof connectors are mated, the contact resistance is ≤10mΩ.
3.4 Salt spray test: According to the provisions of method 1001 in GJB1217-1991, the unmated connector is subjected to a sodium chloride solution with a concentration of 5% of the salt solution. After a neutral salt spray test at a temperature of 35±2°C for 48 hours, there is no corrosion affecting performance.
3.5 Waterproof performance: Under normal temperature and pressure, the male and female of the waterproof connector are inserted and the nuts are installed, and placed in 1m deep water for 4 hours. There is no leakage inside the connector. Water seepage phenomenon. Cool at room temperature and pressure for 30 minutes, and the test meets the requirements of 3.1, 3.2, and 3.3.
3.6 Separation force of contact piece: the separation force of single hole is 1.0-3.0N.
3.7 Mechanical life: Tested in accordance with the 2016 method of GJB1217-1991, the contact piece is inserted and pulled out 3000 times, and the friction surface of the contact piece is allowed to have a slight coating Abrasion, but does not expose its base metal, and does not appear mechanical damage that affects performance. After the test, the contact resistance is tested to meet the requirements of test section 3.3.
3.8 Intermatability: Free connectors and fixed connectors of the same model specification should be able to be fully mated and separated.
3.9 Environmental adaptability: The product should meet the requirements specified in Table 1 after being tested under the conditions listed in Table 1. IP68 Waterproof Connector M19 Screw Lock Wire Specifications: 2pin: rated current: 25A, rated voltage: 500V, insulation resistance: >2000MΩ, shell material: nylon/fiber; 3pin: rated current: 25A, rated voltage: 500V, insulation resistance: >2000MΩ, shell material: nylon/fiber; 4pin: rated current: 25A, rated voltage: 500V, insulation resistance: >2000MΩ, shell material: nylon/fiber;
FAQ
1.Why is Explosion Proof Lighting necessary in your area?
Plenty of commercial facilities have areas where lighting fixtures can come into contact with hazardous materials. These can be flammable, combustible, or ignitable materials, gases, or vapors. These areas can be at risk of fire or even explosion if the lighting fixtures can't withstand the abnormal conditions.
2.What is hazardous location lighting?
Hazardous location lighting refers to fixtures that you can safely use in an area where it's likely that fire might start. According to the National Electrical Code, hazardous locations are those areas "where fire or explosion hazards may exist due to flammable gases or vapors, flammable liquids, combustible dust, or ignitable fibers or flyings." 3.What is explosion-proof light fixture?
Explosion proof lighting refers to lighting fixtures that are able to contain sparks that could potentially the flammable and explosive gases in the atmosphere. Therefore, explosion proof lighting does not refer to lighting equipment that are resistant to explosions but rather, the capacity to prevent external explosions from occurring in a hazardous location.
4.What environments require hazardous location lighting?
Presence of Flammable Liquids and GasesWherever flammable gases and liquids are present, the location may be identified as a hazardous one because such compounds can cause an explosion or catch fire.Gas and liquids have to achieve a critical concentration before it becomes dangerous. However, once they do, that's when a potential disaster can occur.
Company ProfileAs a leading supplier of explosion proof lighting,Lamp suite is dedicated to helping you illuminate numerous settings with powerful and durable lighting systems. We've assisted a variety of businesses with projecting sufficient lighting across the work space or public area, including:- Commercial scenes- Government projects- Mining sites- Remote accommodation sites- Warehouses & other industrial environmentsOur explosion proof lighting is designed using technologically advanced methods with both economical and ecological results. Lighting is a crucial aspect of successful workflow and, therefore, your business' profit.Finding suitable lighting for the work site that won't falter under extreme circumstances is what makes it most reliable in any situation. Lamp suite explosion proof lighting is 100% certified with non-spark, durable, and thick materials, along with all necessary features to maintain a high level of safety at all times.
So, what makes Lamp suite different? Our expertise in solar and technical lighting solutions allows us to give you the appropriate explosion proof lighting to suit you and your business's needs the best. As a result, you can expect outstanding LED performance, lower costs, increased productivity, and safety adherence to give you and your workers total peace of mind.Lamp suite has a passionate team aiming to help you create a safe working or public environment where workers, pedestrians, shoppers, or anyone nearby can feel comfortable moving around.
Our Contact
